Painting

Cleaning brushing exterior walls with choir brushes Thoroughly cleaning wall with water and applying one coat of cement primer and two coats of cement paint in approved colour combination. With ISI mark.
Two coats of Sami Acrylic paint, One coat of cement paint and one coat of Tex Acrylic paint , Two coats of Tex Acrylic paint (Exterior paint), Two coats of 100% Acrylic paint (APEX).

Interior Paints

Two coats of Sami Acrylic paint , One coat of cement paint and one coat of Tex Acrylic paint , Two coats of Tex Acrylic paint (Exterior paint) , Two coats of 100% Acrylic paint , But two coats of White Wash.

Water Seepage and Painting Job -The treatment consists following :

Erecting the scaffolding and opening the cracks in a ‘V’ shape cutting with plaster cutting machine. Filling the cracks with Special Repair Putty. If required injecting the slurry by pressure pump. Finishing the area and coating a special bond coat to apply the paint. Cleaning the surface after coating two coats of cement paint or Semi Acrylic paint in approved colour combination. Area to be calculated as per actual measurement of the whole surface of building.

This treatment we are experienced in the site while
carry out the maintenance job of painting. We can offer you a very best approach of doing the repair as well as the painting giving a through guarantee for your work of crack repair and painting job of your building.

The treatment consists of following.

1. Crack repair (grooves, beam and the column joints)
2. Water seepage
3. Plaster repair (only where required badly)
4. Beams and columns repair (only repairing of joints)
5. Injection Grouting
6. Painting etc. Complete.

This treatment is one treatment. It starts from the testing of the leakage from internal flat we will treat only that area that was affected by the leakage (after our treatment if the new leakage is found that is not our responsibility. It may occur after doing the work) inspection and testing the cracks by testing hammer. If required grouting the area by INJECTION GROUTING : Fixing nipples in walls then giving injection to the Structures to take out air and to stop the leakage of honey coming area. Injecting the grout into the cavities. Mix of grout is Polymer + Cement and water to fill the cracks cavities by using 4 to 5 Kg. Pressure by slurry pump. Then opening out the cracks wherever required. Opening by cutting machine. Filling the gaps with polymer putty. Beams and columns joints treated with Injection grouting. Repairing the junctions, coating polymer grains, curing for 3 days and coating one coat of Primer and two coats of Semi Acrylic Paint.